SteelForm S-16 Sectional Smooth Doors
Designed for peak performance, Raynor SteelForm S-16 heavy-duty, 16-gauge commercial sectional smooth doors with steel skin and rugged hardware provide maximum reliability and durability for high-security in the most demanding applications, such as a busy loading dock.
S-16 Features and Options
Raynor SteelForm S-16 sectional smooth commercial doors are available with numerous features and options, including those listed below.
Durable ConstructionConstructed with stainless steel rivets and roll-formed tongue-in-groove meeting rails for maximum structural integrity, S-16, S-20, S-24, and S-24C doors are built to withstand heavy use.
Rugged Hardware and SpringsYour SteelForm door comes packaged with the right combination of hardware, track, and springs to precisely match your door’s size and application and provides years of reliable service.
Decreased Energy CostsSteelForm doors help you reduce energy costs with a U-shaped, vinyl bottom weatherseal secured by a sturdy aluminum retainer.
Header SealFlexible, EPDM rubber flap header seal on S-16, S-20, S-24, and S-24C reduces air infiltration and energy costs by sealing the top of the door against the header.
Jamb SealJamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the door when closed. Available in EPDM rubber or flexible vinyl flap.
Section Joint SealSteelForm doors are available with a neoprene foam rubber section joint seal to help prevent airflow between sections.
InsulationDoors are available with energy-saving insulation. Choose from white impact-resistant (shown) or steel (26, 24 or 20-gauge) back covers.
Secure LocksIn applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.
EnduraCote™The EnduraCote hardware system comes with springs, track, and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.
Choice of WindowsSelect either 24″ x 8″ or fullview window sections. Choose from a variety of glass, insulated glass, acrylic and polycarbonate styles to suit any application.
Removable Center PostsCarry-away, swing-up options available for extra-wide openings. Ideal for agricultural or airplane hangar applications.
Customized Track and HardwareTrack systems are supplied to fit special clearances, inclines or contour applications. Hardware and track systems can be designed to fit any need. Additional trussing is available for special wind loading applications.
Carbon Monoxide VentAllows you to channel fumes to the outside when the SteelForm S-16 door is closed. Available in a variety of sizes.
High-cycle Counterbalance SystemFor reliable operation in high traffic areas, choose high-cycle torsion springs with 25,000; 50,000 or 100,000 cycle life. For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system.
|Type||Commercial Sectional Garage Doors|
|Size||24′ x 32′ Max|
|Operation||Manual, Motor or Hand Chain|
|IECC Thermal Performance||N/A|
|Construction||1 or 2-Layer Pan|
|Surface Texture||Smooth Exterior|
|Gauge||Steel; Exterior: 16-Gauge|
|Stiles||End Stiles: 13-Gauge; Center Stiles: 16-Gauge|
|Insulation||Optional Expanded Polystyrene (7.7 R-value) with 26, 24, 20, or 16-Gauge Steel Covers|
|Seals||Bottom Seal (3″, 4″ EPDM, or 3″ Yellow); Optional Header Seal|
|Trussing||Wind Load: 20 P.S.F. Tested/13.3 P.S.F. Design Load (standard); Material: U-bar (18-Gauge or 20-Gauge); Sizes: 4″, 6″, or 8″|
|Color||White. Raynor’s ColorWave™ with 1,500 Sherwin-Williams® colors|
|Windows||24″ x 8″ or fullview window sections; glass: choose from a variety of standard or insulated glass, acrylic, and polycarbonate styles to suit any application|
|Type||Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour|
|Finish||Galvanized or Optional White Powder Coat|
|Size||2″ or 3″|
|Gauge||12, 13, 16-Gauge|
|Type||Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counterbalance|
|Springs||Spring Inner Diameter: 2-1/4″, 3-1/2″ or 5-1/2″; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powder Coat|
|Shafts||Tube (13-Gauge) or Solid (D-Shaft, 1″ Keyed, 1-1/4″ Keyed)|
|Hinges||11, 13, 14-Gauge or Hybrid|
|Rollers||Standard (2″ or 3″) or Heavy Duty (2″ or 3″)|
|Lock||Interior Slide Lock or Exterior Lock Bars|
|Hanger Angle||11, 13, 16-Gauge Galvanized or 13-Gauge White Powder Coated|
|Optional Wind Loading||NA|
|Posts||Swing-Up or Carry-Away|